Humbrol AD6001 150ml Acrylic Spray Paint No. 1 Matt Grey Primer & 150ml Silver

Item Description Humbrol AD6001 150ml Acrylic Spray Paint No. 1 Matt (Grey Primer) Humbrol acrylic 150ml spray paint are non-toxic and water based and are ideal for spraying on models whether they are plastic, wooden or metal. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but which can also be used on other substrates. Protects and creates a Matte finish. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability. Coverage: Depends on application and thickness of coats. Application: Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Drying time: 15-30 minutes. How to clean: Hold can upside down after use and depress nozzle for a few seconds to clean. Permanent once dry. Safety Notice: Irritating to eyes. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. Keep out of reach of children. Keep away from sources of ignition - No smoking. Do not breathe vapour / spray. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use only in well-ventilated areas. Extremely flammable, irritant. Humbrol AD6011 150ml Acrylic Spray Paint No. 11 (Silver Metallic) Humbrol acrylic 150ml spray paint are non-toxic and water based and are ideal for spraying on models whether they are plastic, wooden or metal. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but which can also be used on other substrates. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability. Coverage: Depends on application and thickness of coats. Application: Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Drying time: 15-30 minutes. How to clean: Hold can upside down after use and depress nozzle for a few seconds to clean. Permanent once dry. Safety Notice: Irritating to eyes. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. Keep out of reach of children. Keep away from sources of ignition - No smoking. Do not breathe vapour / spray. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use only in well-ventilated areas. Extremely flammable, irritant.