Heavy Duty DPF Foam Cleaner For Dodge Direct Diesel Particulate Filter

Heavy Duty DPF Foam Cleaner For Dodge Direct Diesel Particulate Filter Item Description Our DPF Cleaner is a formula that works to prevent clogging in your Dodge's diesel particulate filters by cleaning and regenerating them. Simply remove the temperature or pressure sensor and empty the can into the filter to aid cleaning. Remove ash deposits in diesel-particle filter systems without disassembly with our DPF Cleaner. DPF Cleaner is fast-acting and is non-corrosive. Our DPF Cleaner is free from solvents and non-flammable. Fast-acting Free from solvents Non-corrosive Non-flammable FAST AND EFFECTIVE CLEANING OF DPF -Our Simply DPF Cleaner is fast-acting, non-corrosive and helps to restore the diesel particulate filter to its full working capacity within minutes. NO DISMANTLING OF DPF - Our Simply DPF Cleaner is suitable for most diesel vehicle types and doesn’t require you to dismantle the DPF to clean it. ACTIVE FOAM - our Simply DPF Cleaner active foam system ensures that even the toughest of blockages are removed. CLEANS SOOT, CARBON AND DEPOSITS -Our Simply DPF Cleaner easily burns out the collected soot, carbon and ash and helps improve fuel consumption and power output. USAGE INSTRUCTIONS:BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY. For professional use only The aerosol should have room temperature Best processing temperature 10 to 25°C. Before use, shake the aerosol. Before use, allow the engine to cool down (maximum 50°C). Observe the instructions of the car manufacturer. Disassemble temperature or pressure sensor from the filter. Insert the special tube into the opening. Empty the can in the following intervals: spray 3 - 5 times; allow to soak for 5 seconds Install temperature or pressure sensor. Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid. Make a test-drive of 30 minutes. This may cause the formation of steam.